Digital LCD Shore A Hardness Durometer/Tester with Built-in PROBE (HT-6510A)
LIGHT & COMPACT DUROMETER WITH BUILT-IN PROBE!
HT-6510A model is a pocket size digital durometer with integrated or built-in probe. The resistance toward the indentation of materials that range from rubber, elastomers and other rubber like substances are measured quickly and effectively with this precision perfect instrument. It measures the depth of an indentation in the material created by a given force on a standardized presser foot and is capable of producing a value from 0 to 100, with higher values indicating a harder material. A durometer testing equipment type A is fully equipped with an indenting foot of hardened steel rod 1.1 mm - 1.4 mm diameter with a truncated 35° cone, 0.79 mm dimeter. It includes an exclusive built-in Microcomputer LSI circuit advanced microprocessor technology and crystal time base that quickly provide measurement readings with the highest level of accuracy and with no guessing errors in less than a second. The results obtained from this test are a useful measure of relative resistance to indentation of various grades of polymers, elastomers and rubbers.
It can measure the penetration hardness of soft rubber, elastomers and other rubber like substances such as neoprene, silicon, vinyl, nitrile, butyl, soft plastics, felt, leather, waxes, printing rollers and similar materials.
In addition, we constantly keep in mind that the safety of the user should always comes first and so we made sure that our products comply with all the necessary health and safety required standards set by the European Directives. Certified to meet the following rigorous standards of ISO-7619 and ISO-868, DIN53505, ASTM D2240, and JIS K7215 set standards. It is recommended that measurements be made with the type D durometer when the value is above 90 HA, and with a type A durometer when the value is less than 10 HD.
Features:
* With INTEGRATED (built-in) PROBE and designed to determine the penetration hardness of rubber, elastomers and other rubber like substance such as neoprene, silicone, vinyl and can also be used for soft plastics, felt, leather and similar materials
* Equipped with wide measuring range and high resolution
* Conforms with the essential health and safety requirements set out by the European Directives along with ISO-7619 and ISO-868, DIN53505, ASTM D 2240, and JIS K7215 set standards
* Uses Microcomputer LSI circuit and crystal time base to offer high accuracy measurement & fast measuring time
* Uses operation stand capable of applying the specimen to the indentor with sufficient recommended force that allows accurate and repeatable hardness tests to increased stability and maximum repeatability
* Automatically switch off after about 2 minutes and also gives you the freedom to manually switch it off anytime to conserves batteries
* Delivers ultra accurate reading with no guessing errors
* Features instant, easy to read, legibly written results indicating a specific value, with a 0.1 resolution
* Complete with FREE sturdy carrying case with contoured rubber compartments that fits the device perfectly, sandwiched between rubber & foam when closed to achieve optimum shock absorption
* Use anywhere and suitable for use in the laboratory or in field conditions
Specifications:
- Test scale: Shore A Hardness
- Standards: DIN53505, ASTM D2240, ISO 7619, JIS K7215
- Parameters displayed: hardness result, average value, max. value
- Measurement range: 0-100HA (Shore A)
- Microcomputer: Newly developed microcomputer delivers maximum results
- Measurement deviation: error <= ±1
- Resolution: 0.1 H
- Temperature Operating conditions: 0 - 50°C
- Humidity Operating Conditions: <80%
- Display: 4 digits, 10mm LCD
- Power supply: 4 x 1.5V AAA (UM-4) battery
- Battery indicator: low battery indicator
- Power off: manual or auto after 10 minutes
- Dimensions: 162mm x 65mm x 38mm
- Weight (without batteries): 170g
ไม่มีความคิดเห็น:
แสดงความคิดเห็น