EC meter Model EC-1383

EC Conductivity Meter mS/cm (EC-1383)


It can be used for Aquarium, Swimming Pool, Spa, Nutrient, Hydroponics and Laboratory etc.

Buy Now!

Specifications:

Measuring range: 0~19.99ms/cm
Resolution: 0.01ms/cm
Accuracy: ±2%F.S
Display: 4-digital LCD
Automatic Temperature Compensation: 0 - 50 °C
Environment: Humidity:≤95℅
Power Supply: 2×3V(CR2032 Battery)
Dimensions: 150mm×27mm×20mm
Weight: 46g

Calibration Solutions:
mS/cm:12.88 ~ 13.0 mS/cm

Accessories included:

2pcs of CR-2032 (3V) Button Battery included
Plastic Case
Trimmer (screwdriver)
User Manual

Operation:
- Remove protective cap from bottom (See product layout)
- To switch on the unit, slide the “ON/OFF” switch located on top of the tester to “ON”.
- Dip tester into sample solution up to the immersion level as shown.
- Stir gently to remove bubbles and wait for 2 minutes
to allow a full temperature compensation before readout.
- Always rinse with distilled water, blot dry before and after each test.
- Switch off the tester and replace protective cap before storing away.

Note:

In the presence of certain radio transmitters, this product may produce
erroneous readings. If this occurs then measurements should be
repeated at another location. It is recommended to check the meter
every three months for accuracy.

1,500.-Tel(0868910596) ดูสินค้าอื่นเพิ่มเติมที่ http://www.taladklongtom.com