7-in-1 Meter Tester ORP , PH, CF, EC, TDS (PPM) °F °C (PHT-027)
9,900.- ผมอนันต์ครับ Tel. 0868910596 http://www.taladklongtom.com/index.php?mo=3&art=406081
Product Description:
An upgraded version of our PHT-026, this Seven-in-One meter now also has a BUILT-IN RECHARGEABLE BATTERY to save you from the hassle of buying, placing & replacing button batteries. Now all you have to do is charge the Built-in Rechargeable Battery the first time you use it, then recharge it again as needed. The built-in battery can last for 4 to 5 years, with standard charging time of approximately two (2) hours.
The PHT-027 can measure up to seven range, ORP(MV), pH, CF, EC, TDS(PPM) °F and °C.The Multi-parameter Water Quality Monitor is a versatile, high-accuracy multi-parameter instrument with reliable multi probe system and with all the functionality of a multi-parameter system. Featuring simultaneously measures and pH, mV, °C or °F and EC, CF or ppm.
Easy to use and indeed an affordable one, which made it possible for non-technical and technical personnel alike to measure dissolved solids, pH, ORP, conductivity and temperature on the spot, accurately and inexpensively throughout a variety of applications. No more switching meters to measure the pH, °C or °F and then the EC, CF or TDS of a solution. Tests that usually require different tools but with PHT-027 it covers all seven measurements.
High acidity or alkalinity can cause direct physical damage to skin, gills eyes and reproductive cycle of fish. Prolonged exposure to unwanted excess substances can cause stress with sometimes-fatal consequences. Changes in either acidity or alkalinity can exert a powerful influence over both water quality and water chemistry, and will have a marked effect on the fish health and filter activity.The fast, efficient, accurate and portable, more precise measurement meets the requirements of your routine multi-measurements. And it comes with FREE pH6.864 and pH4.003 CALIBRATION SOLUTIONS and a POWER ADAPTOR FOR US, UK, EUROPE or AUSTRALIA.
Simultaneously analyze water quality parameters with a single submersible system! This the real deal. Here at GainExpress, not only do you get 2 FREE calibration solutions and your choice of power adaptor, you also get a FREE ORP electrode. Only GainExpress gives you a FREE ORP Electrode.
Features :
With Built-in Rechargeable Battery that can last up to 5 yrs!
Supplied complete with probe, pH electrode, protective cap and calibration screwdriver.
FREE pH6.864 and pH4.003 CALIBRATION SOLUTIONS
FREE pH ORP Electrode
FREE POWER ADAPTOR for Australia, UK, US or Europe system is provided
Provides large LED display for easy monitoring of pH accurately plus the values are readable within few seconds
Manual is provided for quick and easy installation and to best utilize PHT-027
Choice of wall-mount or hung in installing the controller
Includes a BNC connection for use with a PH Electrode
With fast response and easy to calibrate replaceable pH electrode and comes with complete calibration fluids
It is very reliable, stable and transportable
The operation is simple and comfortable
The unit can be simply calibrated in one-point with a mini-screw driver and has a large digital graphic display for maximum efficiency
Specification:
Range
EC : 0.00~19.99ECCF : 0.0~199.9CFTDS : 10~19990ppmPH : 0.00~14.00PHmV: 0~±1999mV°C : -50°C~70°C (°F : -58°F~158°F)
Resolution
EC : 0.01ECCF : 0.1CFTDS : 10ppmPH : 0.01PHmV: 1mV°C : 0.1°C (°F : 0.2°F)
Accuracy
PH : ±0.1PH °C : ±1.0°C mV: ±0.1%F.S±1digitEC, CF, TDS : ±2% F.S
Operating Temperature : 0°C~50°C
Automatic Temperature Compensation (ATC) : 0°C~50°C
Power Supply: DC6V (for UK, US, Europe or Australia)
Dimensions: 155mm x 86mm x 22mm
Weight: 230g
Operating Information:
If it will be used for the first time, the meter has to be charged first. After plugging in the adaptor to the meter, slide the switch to ON position. Charge the built-in rechargeable battery for two hours before you start using PHT-027.
Remove the pH electrode's protective cap and connect the pH electrode to the pH electrode input terminal which can be found on the left part of the unit.
If you wish to use the DC6V slide the control switch to right and left if you want to use the four 1.5 AG13 Batteries.
Immerse the two electrode in the solution to be tested. Stir gently and wait for the reading to stabilize.
Press button when choosing °C or °F. Press button when choosing EC, CF, or PPM to show precise measurement respectively.
Replace ORP electrode if you need to measure ORP related measurements. Do step #4 when changing pH to ORP electrode.
After using, turn off the meter. Rinse the electrode with distilled water to minimize contamination. Put back protective cap on to pH electrode.
GENERAL REMINDER:
Be sure to put back the electrode protective cap after each use.
The glass bulb of the electrode is fragile. Use it carefully and cautiously. Do not touch it with hard or pointy objects nor with your fingertip.
When removing the excess water inside the electrode mouth, wipe gently and carefully.
Clean the electrode before and after you use the unit. It can only be clean with distilled or ionized water specifically
Calibration Settings:
PH Calibration
Immerse the electrode in PH 6.86 buffer (calibration) solution, and gently shake it.
Allow the reading to stabilize. Use the mini-screw driver to turn the "pH6.86" calibration knob until the displays show "6.86"pH. Rinse the electrode with distilled water, and wipe it with filter-paper.
Immerse the electrode in pH4.01 buffer (calibration) solution until "4.01pH" appears. Rinse the electrode with distilled water, and wipe it with filter-paper.
Immerse the electrode in pH9.18 buffer (calibration) solution until "9.18pH" appears. pH9.18 buffer solution is not included in the package.
EC, CF, ppm calibration
Press button, choose EC for operating. Immerse the meter in 12880µ s/cm (12.88EC) calibration solution. 12880µ s/cm or 12.88EC buffer solution is not included in the package.
Allow the reading to stabilize. Use mini-screw driver turn the CAL Calibration knob until "12.88EC" appears. Rinse the electrode with distilled water, and wipe it with filter-paper.
Immerse the meter in "1413µ s/cm (1.41EC)" calibration solution until "1413(1.41EC)" shows. 1413µ s/cm or 1.41EC buffer solution is not included in the package.
The instrument's pH range must be re-calibrated whenever:
The electrode has not been in used or has been in the storage for 4 or 5 months from the last calibration
the electrode has been in used very often in a day
the electrode has been replaced or
the utmost accuracy is required
Accessories included:
BUILT-IN RECHARGEABLE BATTERY
FREE Detachable ORP Electrode only at GainExpress!
FREE pH6.864 and pH4.003 CALIBRATION SOLUTIONS
Detachable pH electrode
Power Adaptor for Australia, UK, US or Europe (We can provide the different type of adaptor, i.e Australia, UK or US or Europe)
Mini-Screw Driver
User's Manual
Packaging: White gift box เครื่อง 7 IN 1 Meter ข้อดี ซื้อเครื่องเดียววัดได้ 6 อย่าง คือ ค่า pH, ORP, อุณหภูมิ, EC, TDS, CF
ใช้งานง่ายมาก ๆ ครับ คือ อยากจะวัดค่าอะไรให้กดปุ่มนั้น มีทั้งหมด 3 โพรบ คือ โพรบแรก ติดมากับเครื่องอยู่แล้ววัดได้สี่ค่าคือ อุณหภูมิ, CF, TDS, EC ส่วนอีกสองค่าคือ pH และ ORP มีให้อีก 2 โพรบต่างหากสามารถถอดเปลี่ยนถ้าต้องการจะวัดค่าใดค่าหนึ่ง ดูรูปประกอบครับ เหมาะมาก ๆ ที่ต้องการจะวัดสารละลายใด ๆ ที่ต้องการทราบค่ามาก ๆ เช่น สารเคมี หรือสารละลายใด ๆ ที่เราไม่ทราบค่าอะไรของมันเลย เราอาจจะพบโดยบังเอิญและต้องการทราบรายละเอียดของมันให้มากที่สุด หรือใช้กับห้องทดลองทางวิทยาศาสตร์ หรือใช้นอกสถานที่ก็สะดวกครับ พกพาได้ไม่ใหญ่จนเกินไปนัก
ไม่มีความคิดเห็น:
แสดงความคิดเห็น